Hooded Wall Vent with Spring Loaded Damper, Gasket and Screen - Painted

(292 customer reviews)


    • Wide mouth hood designed for optimal airflow, perfect for kitchen range or bathroom exhaust
    • Quality constructed from heavy-duty 28 gauge pre-painted galvanized steel
    • Features ¼ inch removable screen and spring loaded damper with built in foam gasket
    • Comes with an 8-¼” long galvanized steel tube built into the flange for wall mounted installation – no screws needed
    • Available for duct sizes 3 inch to 10 inch diameter
    • Available in black, brown, and white. mill-finish aluminum and mill-finish galvanized steel versions also available

SKU WVEBP Categories , ,


The FAMCO WVEBP Hooded Wall Vent with Spring Loaded Damper, Gasket, and Screen, Painted can be used for air exhaust. The WVEBP allows for less restriction of air flow. This hooded wall vent is quality constructed from Heavy Duty 28 gauge pre-painted steel. The FAMCO WVEBP comes with a ¼ inch removable screen and spring loaded damper with gasket. Available in sizes 3 inch to 10 inch. Size reflects diameter of pipe. Colors available are black, brown, and white. The FAMCO WVEBP Hooded Wall Vent with Spring Loaded Damper, Gasket, and Screen, Painted is manufactured by FAMCO in the United States and comes with a 1-year warranty against product defects and workmanship. If you have any questions about this wall vent, please refer to the FAQs above or feel free to contact us. Download the Product Specs .PDF  

Spec Sheet

Questions and answers of the customers

  1. A

    The pre-painted white is typically what we would recommend, although the unfinished galvanized can also be painted over easily.

  2. A

    The moveable flap you are looking for is what we call a damper, and this wall vent model does have a damper that is designed to open when exhausting and fall back closed when not in use. 

  3. Q Can this be used for an outdoor grill exhaust hood.
    Asked on April 12, 2021 1:32 pm
    There are no answers for this question yet. Answer now
  4. A

    No - a wall vent is not rated for this application.

  5. A

    We would recommend asking the fans manufacturer which would be better for this application - typically, you would not want to reduce this down, as this could strain the fan. We do not currently manufacture a 9" wall vent.

  6. Q How fast can you ship it without paying extra answer now
    Asked on March 30, 2021 12:33 pm

    These vents will typically ship UPS or FedEx Ground, which typically takes 1-5 business days transit time after they have been manufactured and have shipped, varying by location.

  7. A

    This will depend on the strength of your bathroom fan, but in most cases this should be fine.

  8. A

    While we do not currently offer this vent without the 8-1/4" tube, this tube can be trimmed back or cut off entirely/made flush as needed without reducing the functionality of the hood, damper, and screen.

  9. A

    The damper in the WVEB model cannot be reversed to function as an air intake. However, our RDWVG vent may work for you as it comes with a reversible backdraft damper. 

  10. There are no answers for this question yet. Answer now
  11. A

    The damper in these vents will open to allow air flow as low as 5-15 CFM, so these should work fine with your fan.

  12. A

    Typically the PVC pipe exhausting your furnace would not be capped off this way, so we would not recommend adding a wall cap to this piped exhaust application.

  13. A

    This vent is typically installed beneath the siding, you may have to remove or trim a small section of siding to get the vent to sit flush against the wall, depending on the type of siding you have. We do not sell mounting blacks for our wall vents.

Send me a notification for each new answer.

292 reviews for Hooded Wall Vent with Spring Loaded Damper, Gasket and Screen – Painted

Based on 292 reviews
Showing 19 of 292 reviews (4 star). See all 292 reviews
  1. Stephen E. (verified owner)

    The screen was torn at the crease was able to fold it again and firm up tube corner. Other than that a very nice vent, fit well and trims our nice.

  2. Anonymous (verified owner)

    Screen not secured well.

  3. Brian Palmer (verified owner)

  4. Patricia (verified owner)

    High quality product. Good delivery time.

  5. Frank Garcia (verified owner)

  6. Richard Duwe (verified owner)

    Well constructed just not sure I am going to install.

  7. Vince Lin (verified owner)

    Product appears to be of nice quality. I did receive the item and there were a few blemishes in the black paint. However, will not be noticeable once installed on the home.

    It is worth noting that the black finish does not resemble the photo. I was under the impression that the finish would be matte powder coat and it is actually more of a semi-gloss or satin finish.

  8. Ronald (verified owner)

    Product is much superior to models that I have looked at in the local stores and other sources on line. The damper functions well. The product could be improved with a better lip or notch to hold the screen in place.

  9. Samuel (verified owner)

  10. Jerry Wallace (verified owner)

    The wire screen is not attached to the unit. The first time a bird lands on it will be pushed back into the unit, which will cause the flapper to become forced shut or open. Or, the screen would fall to the ground. Not good events.

    Four, or better six, pop rivits would secure the screen in place. I noted use of pop rivits in construction of the unit. Seems like fairly quick and inexpensive solution to a problem that would render unit useless to me.
    Hope this helps.

    Jerry Wallace

  11. Hunter F. (verified owner)

    Came out great, the only problem was one of the rivets coming undone in shipping.

  12. Anonymous (verified owner)

    Product is fine. Hood material seems a bit light guage….bent easy when pushing into place. Screen material does not fit well….sides are wide open and don’t mimic the shape of the hood.

  13. GERALD Greenman (verified owner)

    Delivery was longer than anticipated

  14. Mike (verified owner)

    Would like hemmed edges on the side pieces.

  15. korn w. (verified owner)

  16. Bruce C. (verified owner)

    Screen not installed

  17. Nathan (verified owner)

  18. Todd Schilling (verified owner)

    Great product….pricey….but all us smart fabricators know “you get what ya pay for”!

  19. Mike Lenox (verified owner)

    When received, screen was “popped” in so vent would not open. I knew to check it. Others might not. Easy to correct it. Otherwise, all good. Installed and works well.

Add a review

Your email address will not be published. Required fields are marked *

Bulk Discounts + Free Shipping = Pro's Advantage | Learn More
Bulk Discounts + Free Shipping = Pro's Advantage
Learn More