Hooded Wall Vent with Spring Loaded Damper, Gasket and Screen – Painted

Current lead times can be found after placing items in your shopping cart and at checkout.

The pre-painted white is typically what we would recommend, although the unfinished galvanized can also be painted over easily.

The moveable flap you are looking for is what we call a damper, and this wall vent model does have a damper that is designed to open when exhausting and fall back closed when not in use. 

No - a wall vent is not rated for this application.

Yes.

We would recommend asking the fans manufacturer which would be better for this application - typically, you would not want to reduce this down, as this could strain the fan. We do not currently manufacture a 9" wall vent.

These vents will typically ship UPS or FedEx Ground, which typically takes 1-5 business days transit time after they have been manufactured and have shipped, varying by location.

This will depend on the strength of your bathroom fan, but in most cases this should be fine.

While we do not currently offer this vent without the 8-1/4" tube, this tube can be trimmed back or cut off entirely/made flush as needed without reducing the functionality of the hood, damper, and screen.

The damper in the WVEB model cannot be reversed to function as an air intake. However, our RDWVG vent may work for you as it comes with a reversible backdraft damper. 

The damper in these vents will open to allow air flow as low as 5-15 CFM, so these should work fine with your fan.

Typically the PVC pipe exhausting your furnace would not be capped off this way, so we would not recommend adding a wall cap to this piped exhaust application.

This vent is typically installed beneath the siding, you may have to remove or trim a small section of siding to get the vent to sit flush against the wall, depending on the type of siding you have. We do not sell mounting blacks for our wall vents.