Masonry to Metal Chimney Transition - Galvanized

(5 customer reviews)

$60.36

Category: Chimney Cap – Subcategory: Adapter Material: Galvanized Steel – Finish: Mill – Thickness: 28 Gauge – Sku: ATA

We are unable to make an adapter to fit flues larger than 14″ x 18″ rectangular or 16″ x 16″ square

Hole Size * 

Diameter in inches of round opening at the top of the transition box (This cannot be larger than the length or width of the box)

Flue Tile Width (in inches) * 

Outside width in inches across the flue tile (measured to the nearest 1/8th inch)

Flue Tile Length (in inches) * 

Outside length in inches across the flue tile (measured to the nearest 1/8th inch)

Description

The FAMCO ATA Tile Cap Adapter allows a square chimney tile or flue to accept round caps to terminations. The adapter fits over masonry and tile chimneys. This product includes a draw bolt collar for easy installation and a secure fit. Quality constructed in 28 gauge Galvanized steel. The FAMCO ATA Tile Cap Adapter is a custom item requiring your exact length and width measurements for the outside dimensions of your flue. These sizes work with a range of diameter openings from 4" to 16". The overall height of the adapter is 3½". Make sure to take accurate measurements to ensure ordering the correct size. We are unable to make an adapter for flues larger than 14" x 18" rectangular or 16" x 16" square. The FAMCO ATA Tile Adapter is manufactured by FAMCO in the United States and comes with a 1-year warranty against product defects and workmanship. Please note that this adapter is built custom sized to fit your flue, and is not eligible to be returned for a refund. If you have any questions about this adapter, please refer to the FAQs above or feel free to contact us.

Spec Sheet

Questions and answers of the customers

    I Have built a new porch roof over my old roof. the top for the chimney is a clay flue with outside dimensions 12 7/8 X 11 5/8 X 7/8"Thick. will this product fit. i just need to add 5.5' of 6" pipe.. Will this fit over the clay flu?
  1. Q I Have built a new porch roof over my old roof. the top for the chimney is a clay flue with outsi...... Read more answer now
    Asked on November 25, 2020 1:18 pm
    A

    This product is not rated to support pipe, and is only designed to have a cap mounted on top. It can be made to fit custom dimension flues. 

  2. So am adding a 2 story on my house and I currently have a 1 story high chimmey on that end of the house. The new addition will not only be taller but wider enclosing the current chimmey making it need to be taller. Could I remove the current chimmey down to the new floor height of addition, and start from there with your adapter and pipe up to roof?
  3. Q So am adding a 2 story on my house and I currently have a 1 story high chimmey on that end of the...... Read more answer now
    Asked on October 30, 2020 8:00 pm
    A

    No - our adapter is only designed to mount to the flue with a chimney cap above, and should not be used to support additional pipe.

Send me a notification for each new answer.

5 reviews for Masonry to Metal Chimney Transition – Galvanized

4.8
Based on 5 reviews
5 star
80%
4 star
20%
3 star
0%
2 star
0%
1 star
0%
Showing 1 of 5 reviews (4 star). See all 5 reviews
  1. Anonymous (verified owner)

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Fireplace Chimney Caps

    Wind Directional Chimney Cap – Galvanized

    $69.51$242.87 Select options
    Request Quote
Bulk Discounts + Free Shipping = Pro's Advantage | Learn More
Bulk Discounts + Free Shipping = Pro's Advantage
Learn More