Plastic Roof Vent with 50 sq, in. Net Free Area

(1 customer review)

$21.65

  • Quality constructed from high density polyethylene (HDP)
  • Contains UV inhibitors which help protect the material from deteriorating in the sunlight
  • Perfect for attic ventilation, this vent features a 50 square inch opening
  • Works best when used with a soffit or gable end venting
  • Flange measuring 15⅛ inches x 17½ inches with an inner opening of 8 x 10 inches
  • Available in black or dark brown
Clear

SKU FA50 Categories , ,

Description

The FAMCO FA50 Plastic Roof Vent with 50 square inch net free area is made of high density polyethylene (HDP), one of the most versatile and widely used plastics available. This plastic vent contains UV inhibitors which help protect the material from deteriorating in the sunlight. These vents are resistant to cold, heat, and ultraviolet rays. Perfect for attic ventilation, this vent features a 50 square inch opening. Works best when used with a soffit or gable end venting. The FA50 roof vent has a ¼ inch plastic molded screen built into the hood to prevent bird nesting. This product is a standard residential roof vent with 50 square inches of free area. Available in black or dark brown. The FAMCO FA50 Plastic Roof Vent with 50 square inch net free area has a flange measuring 15⅛ inches x 17½ inches with an inner opening of 8 x 10 inches. The FAMCO FA50 Plastic Roof Vent with 50 square inch net free area is manufactured by FAMCO in the United States and comes with a 1-year warranty against product defects and workmanship. If you have any questions about this product, please refer to the FAQs above or feel free to contact us.

Spec Sheet

Print Spec Sheet

Plastic Roof Vent with 50 sq, in. Net Free Area

SKU: FA50

Questions and answers of the customers

    Can this be used in a corrugated metal on purlins over a shingled roof ? If NO please recommend... Upstate NY
  1. Q Can this be used in a corrugated metal on purlins over a shingled roof ? If NO please recommend........ Read more answer now
    Asked on July 8, 2021 11:52 am
    A

    No - we do not currently manufacture or supply vents with a flange designed for use on metal roofs

  2. Do you have recommended installation instructions? Should adhesives be used?
  3. Q Do you have recommended installation instructions? Should adhesives be used? answer now
    Asked on June 15, 2021 4:47 pm
    A

    Hello Walter, here is a copy of our installation instructions for these plastic vents. do not use any tar or petroleum based adhesives when installing this vent, and we recommend against using caulk unless it is necessary. We are currently working on getting a better document for this, our apologies it is just a picture file currently:

    https://www.famcomfg.com/wp-content/uploads/2021/06/FA50-Install-Picture-scaled.jpg

     

  4. Is there recommendation roof pitch for use?
  5. Q Is there recommendation roof pitch for use? answer now
    Asked on March 20, 2021 12:34 pm
    A

    This vent can be used on anything from 1/12 up to 12/12 pitched roofs - this vent is not recommended for use on a flat roof.

  6. Is there a way to remove the top of this unit? It is clogged and needs to be cleaned.
  7. Q Is there a way to remove the top of this unit? It is clogged and needs to be cleaned. answer now
    Asked on March 16, 2021 5:57 pm
    A

    No - the top of this product is molded into the flange and is not designed to be removable.

Send me a notification for each new answer.

1 review for Plastic Roof Vent with 50 sq, in. Net Free Area

5.0
Based on 1 review
5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. McQuillen, C. (verified owner)

    Fast and Easy!

Add a review

Your email address will not be published. Required fields are marked *

Bulk Discounts + Free Shipping = Pro's Advantage | Learn More
Bulk Discounts + Free Shipping = Pro's Advantage
Learn More